Time Controlled, up to 46 m3/h Series SM-SF/ETP4
UTILITY
Water softeners are used in order to remove the total hardness of the water and to produce the so-called soft water. This is achieved by passing the water through ion-exchange resin bed, which exchanges the ions of Calcium and Magnesium with Sodium. When the pre-programmable time reached, the resin is regenerated automatically, by means of salt solution (Sodium Chloride – brine).
The product water – free of hardness – does not cause salt scalings and the entire equipment that uses this water is thus protected.
COMMON APPLICATIONS
- Feed water for boilers or cooling towers
- Total hardness reduction in water for general use running through distributing networks (industries, hotels, hospitals, buildings, residences, etc)
- Any application which requires soft water
ADVANTAGES
- Fully automated operation / possibility for manual regeneration according to the user’s will.
- Automation operates on low voltage (12 VAC) for the personnel’s protection.
- Minor pressure drop.
- Minimum maintenance cost.
- Steel resin vessel, internally and externally coated with polyethylene film
- Electronic control panel
The SM/ETP4 series designed for small water flow, up to 3,6 m3/h
| Model | Operating Capacity m3*f°H |
Maximum flow m3/h |
Pressure loss bar |
|---|---|---|---|
| SM11/ETP4 | 70 | 1,8 | 0,8 |
| SM21/ETP4 | 125 | 2,4 | 1,1 |
| SM41/ETP4 | 210 | 3,0 | 1,2 |
| SM61/ETP4 | 335 | 3,6 | 1,2 |
| SM81/ETP4 | 600 | 3,6 | 1,2 |
| SM101/ETP4 | 750 | 3,6 | 1,2 |
The SF/ETP4 series designed for higher water flow
| Model | Operating Capacity m3*f°H |
Maximum flow m3/h |
Pressure loss bar |
|---|---|---|---|
| SF361/ETP4 | 750 | 10,8 | 2 |
| SF601/ETP4 | 1100 | 12,6 | 2 |
| SF801/ETP4 | 1500 | 12,6 | 2 |
| SF1201/ETP4 | 2250 | 13,2 | 2 |
| SF1801/ETP4 | 3400 | 13,2 | 2 |
| SF2001/ETP4 | 4900 | 13,2 | 2 |
The SFH/ETP4 series designed for even higher water flow, with external galvanized steel piping
| Model | Operating Capacity m3*f°H |
Maximum flow m3/h |
Pressure loss bar |
|---|---|---|---|
| SFH601/ETP4 | 1100 | 20,4 | 2 |
| SFH1201/ETP4 | 2250 | 36 | 2 |
| SFH1801/ETP4 | 3400 | 46 | 2 |
| SFH2001/ETP4 | 4900 | 46 | 2 |
The SMH/ETP4 series has the same design against SFH/ETP4, but external piping constructed from PVC
| Model | Operating Capacity m3*f°H |
Maximum flow m3/h |
Pressure loss bar |
|---|---|---|---|
| SMH361/ETP4 | 750 | 8 | 1,8 |
| SMH601/ETP4 | 1100 | 10 | 1,8 |
| SMH901/ETP4 | 1800 | 16 | 1,8 |
| SMH1201/ETP4 | 2400 | 18 | 1,8 |
| SMH1801/ETP4 | 3670 | 20 | 1,8 |
| SMH2001/ETP4 | 5200 | 18 | 1,8 |
Finally series SML/ETP4 has the same design against SMH/ETP4, but even higher water flow
| Model | Operating Capacity m3*f°H |
Maximum flow m3/h |
Pressure loss bar |
|---|---|---|---|
| SML1201/ETP4 | 2400 | 30 | 1,8 |
| SML1801/ETP4 | 3670 | 40 | 1,8 |
| SML2001/ETP4 | 5200 | 32 | 1,8 |
